BMW Navi Interface MID010005

Ich habe bei meiner r18 den Anschluss fürs Navigationsgerät hinter der Steckdose gemacht .Tank hinten gelöst und leicht angehoben das Kabel am Originalen kabelbaum verlegt- kommt man gerade so dran dann hinter der Steckdose am Kabel angelötete funktioniert Super

BMW R18 USB Poweradapter (w. Loader) installation (prevents drained battery).

Parts used:

Motorrad Dresden: 1 x MID090005 Navi interface CAN-Bus R18 (€ 85,90 incl. porto+vat )

AliXpress: Dual USB adapter (€ 8,59)

How I did it:

Tank removal

1. Unscrew the 3 bolts that hold the tank in place.

2. Remove the 2 side-plates for access to the petrol-hose and vent-hose on the right side and the contact cable for the tank gauge on the left side. Take care that the petrol-hose is not under tension when you push the white side pressure plates, otherwise it’s difficult to release!

Note: You don’t need to empty the tank because the coupling closes automatically.

3. Locate the CAN-bus on the frame (see pic)

Cut the Tie-Wrap and, because the Navi Interface has its own, remove the CAN-bus sleeve from the plug.

Plug-in CAN-bus sleeve into the Navi Interface.

4. Link the USB adapter tot he Navi Interface (solder connection) and correctly secure everything with Tie-Wraps.

5. Check for correct working before reinstallation the Tank and side-plates.